Тракторы
Комбайны
Разбрасыватели удобрений
Плуги
Культиваторы
Глубокорыхлители
Tractors
Harvesters
Fertilizer spreaders
Ploughs
Cultivators
Subsoil cultivators
DCM
/
/
Select a series
All series
M36
M42ISO
3 models
Fertilizer spreaders
Fertilizer spreaders
Hopper capacity, l
1200
Operating width, m
10-24
Country of origin
DCM S24М
S24М
Model
Hopper capacity, l
Operating width, m
Italy
Country of origin
DCM M36
Model
1500
18-36
Италия
M36
Fertilizer spreaders
Hopper capacity, l
4200
Operating width, m
18-36
Country of origin
DCM M42ISO
M42ISO
Model
Italy
1 model
Fertilizer spreaders
Hopper capacity, l
1200
Operating width, m
10-24
Country of origin
DCM S24М
S24М
Model
Italy
DCM S24M
The S24 professional fertilizer and seed spreader is designed to work not only in an open field, operating at a distribution width of 10 to 24 meters, but also in orchards and vineyards, at a distribution width of 2 to 5 meters. The initial capacity of the hopper is 1200 liters, but it can be expanded to 2300 liters with the use of extensions. The spinner spreaders, blades, agitators, housing and opening plates are made of stainless steel to ensure a long service life. Due to the use of aggressive products during operation, each component of the machine was treated and painted before assembly. A fully stainless steel version with a capacity ranging from 1200 to 2300 liters is available. The S24 models come in various configurations:

S24M = a fertilizer spreader equipped with independent hydraulic flap door opening functionality.

S24E - an ISOBUS fertilizer spreader equipped with a weighing system.

S24S = an ISOBUS fertilizer spreader with a weighing system and a 1.0 section control system based on dosage modification and job card work (8 sections).
Parameters
Operating width, m
10-24
Model
Country of origin
S24M
Italy
Hopper capacity, l
1200
Weight, kg
280
The width of the distribution in a row, m
2-5
Hopper capacity, l
2300
Maximum hopper capacity, l
220
PTO drive shaft with a shear bolt L = 1200 mm (1-3/8” Z6_1-3/8” Z6) for the 1500 – 3000 liter model
In the configuration
Distribution tables for managing the kg/ha application rate depending on the type of fertilizer. This is done by means of a free app (iOS or Android) available for download.
In the configuration
Brush guards from stainless steel
In the configuration
Wear-resistant frame coated in powder paint
In the configuration
Wear-resistant frame coated in powder paint
In the configuration
Adjustable shoulder blades ST. The spreading width is from 10 to 24 meters. with a click (without changing the type of blades)
In the configuration
Hopper bottom, opening/closing flaps, spinner spreaders, distributing blades, protection housing, nuts, bolts and agitators from stainless steel
In the configuration
3-point Cat.2 or Cat.3 hitch
In the configuration
EU legislation-compliant spinner spreaders protection
In the configuration
Retroreflectors and white/red reflective tape for road safety
In the configuration
Independent opening/closing of flaps
Hydraulic
Reduction gear in an oil reservoir (totally enclosed)
In the configuration
1 model
Fertilizer spreaders
Hopper capacity, l
Operating width, m
Country of origin
DCM M36
Model
1500
18-36
Italy
M36
DCM M36
The M36 fertilizer and seed spreader has been specifically designed for professional farmers. The operating distribution width ranges from 18 to 36 meters. The spinner spreaders, blades, agitators, housing and opening plates are made of stainless steel to ensure a long service life. Due to the use of aggressive products during operation, each component of the machine was treated and painted before assembly. A fully stainless steel version with a capacity ranging from 1,500 to 4,200 liters is available. The version of the machine with ISOBUS control and strain gauges allows you to adjust the dose and operating width using GPS, providing perfect overlap, saving costs and maximizing efficiency, especially on irregularly shaped fields. Thanks to the 1.0 section control system, the dose and the fertilizer release point are automatically adjusted by disconnecting the sections from the outside in, 4 sections on each side. On wedge-shaped areas of the fields, the fertilizer spread is more uniform, and the actual amount of fertilizer remains constant over the entire surface. The M36S model has a standard 8-section control of the operating width by changing the dose. By adding job cards to the monitor, it is possible to carry out differentiated fertilization based on the actual needs of plants. The M36 models come in different configurations:

M36M = a fertilizer spreader equipped with independent hydraulic flap door opening functionality.

M36E = an ISOBUS fertilizer spreader equipped with a weighing system.

M36S = an ISOBUS fertilizer spreader with a weighing system and a 1.0 section control system based on dosage modification (8 sections).
Parameters
Operating width, m
18-36
Model
Country of origin
S24M
Italy
Hopper capacity, l
1500
Weight, kg
530
Granulometric kit for fertilizer calibration
In the configuration
Distribution tables for managing the kg/ha application rate depending on the type of fertilizer. This is done by means of a free app (iOS or Android) available for download.
In the configuration
Maximum hopper capacity, l
4200
PTO drive shaft with a shear bolt L = 1200 mm (1-3/8” Z6_1-3/8” Z6) for the 1500 – 3000 liter model
In the configuration
The maximum width of the hopper, cm
220
Brush guards from stainless steel
In the configuration
Hopper bottom, opening/closing flaps, spinner spreaders, distributing blades, protection housing, nuts, bolts and agitators from stainless steel
In the configuration
Wear-resistant bunker coated in powder paint
In the configuration
Adjustable K1 blades. Distribution width ranges from 18 to 36 meters and can be adjusted by click (without changing the blade type)
In the configuration
3-point Cat.2 or Cat.3 hitch
In the configuration
EU legislation-compliant spinner spreaders protection
In the configuration
Retroreflectors and white/red reflective tape for road safety
In the configuration
Independent opening/closing of flaps
Hydraulic. This requires 2 double-acting hydraulic couplings
Reduction gear in an oil reservoir (totally enclosed)
In the configuration
1 model
Fertilizer spreaders
Hopper capacity, l
4200
Operating width, m
18-36
Country of origin
DCM M42ISO
M42ISO
Model
Italy
DCM M42ISO
The M42 EOS fertilizer spreader with a hopper capacity of 1500- 4200 liters has been specially designed for professional farmers. The working width of 18-36 m (option 24-45 m) is divided into 16 sections (8 on the right— 8 on the left). The dose and the point of precipitation of the fertilizer are automatically adjusted by disconnecting the sections from the outside to the inside. The section management system connected to the ISOBUS terminal allows you to adjust the dose and working width using GPS, ensuring perfect overlap, saving costs and maximizing productivity, especially in the presence of irregularly shaped fields. Thanks to the patented frame, the spreader has been thoroughly tested in terms of flow control, regardless of changes in quantity, speed or working width.
Parameters
18-36
M42ISO
Italy
1500
774
4200
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
Electric
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
In the configuration
Operating width, m
Model
Country of origin
Hopper capacity, l
Weight, kg
Maximum hopper capacity, l
PTO drive shaft with a shear bolt L = 1200 mm (1-3/8” Z6_1-3/8” Z6) for the 1500 – 3000 liter model
Brush guards from stainless steel
Distribution tables for managing the kg/ha application rate depending on the type of fertilizer. This is done by means of a free app (iOS or Android) available for download.
Granulometric kit for fertilizer calibration
Wear-resistant frame coated in powder paint
Wear-resistant bunker coated in powder paint
Adjustable K1 blades. Distribution width ranges from 18 to 36 meters and can be adjusted by click (without changing the blade type)
Hopper bottom, opening/closing flaps, spinner spreaders, distributing blades, protection housing, nuts, bolts and agitators from stainless steel
3-point Cat.2 or Cat.3 hitch
EU legislation-compliant spinner spreaders protection
Retroreflectors and white/red reflective tape for road safety
A set of LED lights
Independent opening/closing of flaps
Reduction gear in an oil reservoir (totally enclosed)
Automatic tractor-speed-based dosage system (DPAE)
Additional frame with a self-calibration and continuous weighing system (with 2 strain gauges)
ISO 11783 CABLE. You can connect a tractor equipped with the ISOBUS system directly to the machine. ATTENTION: If you have an ISOBUS monitor, check compatibility and consult the manufacturer if you need an additional license for your monitor (especially for variable fertilization speed).
All licenses are active on the spreader control unit.
Section control using 2 independent electric drives (16 sections)
LIMIT-C system for fertilizer distribution along the field boundaries, installed on the right side
Driveshaft adapter for hitching with tractors that have an 8-slots PTO shank. Auto-correction on slopes (up to 25°)
A set of stainless steel spray guards
Our company’s managers will gladly respond to your questions and calculate the cost of services, as well as prepare an individual quotation.
Find a dealer in your region
By clicking the "Submit" button, you accept the User Agreement