10 models
Moro Aratri
Moro Aratri
Plowing depth, cm
30-40
Number of plow bottoms
2
Country of origin
STEP BVM
BVM
Model
Plowing depth, cm
Number of plow bottoms
Italy
Country of origin
STEP TRV
Model
25-35
3
Italy
TRV
Moro Aratri
Moro Aratri
Plowing depth, cm
25-35
Number of plow bottoms
4
Country of origin
STEP QRV
QRV
Model
Italy
Plowing depth, cm
25-35
Number of plow bottoms
5
Country of origin
Italy
STEP PNT
PNT
Model
Moro Aratri
Plowing depth, cm
20-30
Number of plow bottoms
6
Country of origin
STEP EXA
EXA
Model
Italy
Moro Aratri
Plowing depth, cm
25-35
Number of plow bottoms
5
Country of origin
DRAGON 5+ AS
5+ AS
Model
Italy
Moro Aratri
Plowing depth, cm
25-35
Number of plow bottoms
6
Country of origin
DRAGON 5+1 AS
5+1 AS
Model
Italy
Moro Aratri
Plowing depth, cm
25-35
Number of plow bottoms
7
Country of origin
DRAGON 6+1 AS
6+1 AS
Model
Italy
Moro Aratri
Plowing depth, cm
25-35
Number of plow bottoms
9
Country of origin
DRAGON 8+1 AS
8+1 AS
Model
Italy
Moro Aratri
Plowing depth, cm
25-35
Number of plow bottoms
8
Country of origin
DRAGON 7+1 AS
7+1 AS
Model
Italy
STEP BVM 12А
A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 2 plow bottoms for tractors with power output from 80-110 hp.
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
2
Model
Country of origin
Mounted plow STEP BVM 12А
Italy
Plowing depth, cm
25-30
Required tractor power, hp
80-90
Distance between plow bottoms, cm
100-110
Frame clearance, cm
84
Furrow width
36/41/46/52
Frame section, mm
120х120х10
Weight, kg
800
STEP TRV 12A
A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 3 plow bottoms for tractors with power output from 100-140 hp.
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
3
Model
Country of origin
Mounted plow STEP TRV 12A
Italy
Plowing depth, cm
25-33
Required tractor power, hp
130-150
Distance between plow bottoms, cm
100-130
Frame clearance, cm
84
Furrow width
36/41/46/52
Frame section, mm
120х120х10
Weight, kg
1150
STEP QRV 12A
A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 4 plow bottoms for tractors with power output from 125-165 hp.
MORO Aratri plows are equipped with a continuously operating protection system that prevents them from being damaged when hitting rocks and other obstacles. The system guarantees high-quality plowing on rocky soils. When hitting an obstacle, the plow bottom is smoothly lifted out of the soil. The higher the plow bottom is lifted, the lower its pressure is on the obstacle. The pressure force in the system can be adjusted, that is, the plow can be used for plowing both clean and rocky soils.
MORO Aratri plows are equipped with a continuously operating protection system that prevents them from being damaged when hitting rocks and other obstacles. The system guarantees high-quality plowing on rocky soils. When hitting an obstacle, the plow bottom is smoothly lifted out of the soil. The higher the plow bottom is lifted, the lower its pressure is on the obstacle. The pressure force in the system can be adjusted, that is, the plow can be used for plowing both clean and rocky soils.
Parameters
Number of plow bottoms
4
Model
Country of origin
Mounted plow STEP QRV 12A
Italy
Plowing depth, cm
25-35
Required tractor power, hp
140-180
Distance between plow bottoms, cm
100-110
Frame clearance, cm
84
Furrow width
36/41/46/52
Frame section, mm
150х120х10
Weight, kg
1480
STEP PNT 14A
A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 5 plow bottoms for tractors with power output from 150 - 240 hp.
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
5
Model
Country of origin
Mounted plow STEP PNT 14A
Italy
Plowing depth, cm
25-35
Required tractor power, hp
160-210
Distance between plow bottoms, cm
90-105
Frame clearance, cm
84
Furrow width
34/39/44/49
Frame section, mm
150х120х10
Weight
1830
STEP EXA 16A
A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 6 plow bottoms for tractors with power output from 200 - 270 hp.
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
6
Model
Country of origin
Mounted plow STEP EXA 16A
Italy
Plowing depth, cm
25-35
Required tractor power, hp
260-320
Distance between plow bottoms, cm
95-100
Frame clearance, cm
83
Furrow width
33/37/42/47
Frame section, mm
150х120х10
Weight, kg
2350
DRAGON 5+ AS
A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 5 plow bottoms for tractors with power output from 180−260 hp.
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
5
Model
Country of origin
Semi-mounted plow Dragon 5+ AS
Italy
Plowing depth, cm
25-35
Required tractor power, hp
180-260
Distance between plow bottoms, cm
100
Frame clearance, cm
85
Furrow width
33/37/42/47
Frame section, mm
200х120x10
Weight, kg
3170
DRAGON 5+1 AS
A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 6 plow bottoms for tractors with power output from 200−280 hp.
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
6
Model
Country of origin
Semi-mounted plow Dragon 5+1 AS
Italy
Plowing depth, cm
25-35
Required tractor power, hp
200-280
Distance between plow bottoms, cm
100
Frame clearance, cm
85
Furrow width
33/37/42/47
Frame section, mm
200х120х10
Weight, kg
3450
A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 7 plow bottoms for tractors with power output from 230−350 hp.
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
DRAGON 6+1 AS
Parameters
Number of plow bottoms
7
Model
Country of origin
Semi-mounted plow Dragon 6+1 AS
Italy
Plowing depth, cm
25-35
Required tractor power, hp
230-350
Distance between plow bottoms, cm
100
Frame clearance, cm
85
Furrow width
33/37/42/47
Frame section, mm
200х120x10
Weight, kg
3740
DRAGON 7+1 AS
A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 8 plow bottoms for tractors with power output from 300−450 hp.
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
8
Model
Country of origin
Semi-mounted plow Dragon 7+1 AS
Italy
Plowing depth, cm
25-35
Required tractor power, hp
300-450
Distance between plow bottoms, cm
100
Frame clearance, cm
85
Furrow width
33/37/42/47
Frame section, mm
200х120x10
Weight, kg
4100
DRAGON 8+1 AS
A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 9 plow bottoms for tractors with power output from 320−500 hp.
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)
Parameters
Number of plow bottoms
9
Model
Country of origin
Semi-mounted plow Dragon 8+1 AS
Italy
Plowing depth, cm
25-35
Required tractor power, hp
320-500
Distance between plow bottoms, cm
100
Frame clearance, cm
85
Furrow width
33/37/42/47
Frame section, mm
200х120x10
Weight, kg
4460
Our company’s managers will gladly respond to your questions and calculate the cost of services, as well as prepare an individual quotation.
Find a dealer in your region
By clicking the "Submit" button, you accept the User Agreement
Equipment
Brands
Dealers
Miscellaneous
© 2024, United Industrial LLC, INN 1650202670, OGRN 1101650000870
CHCNAV
