Ploughs

Ploughs

Plowing depth, cm

25-35

Number of plow bottoms

4

Country of origin

STEP QRV 12A

STEP QRV 12A

Model

Italy

Plowing depth, cm

25-35

Number of plow bottoms

5

Country of origin

Italy

STEP PNT 14A

STEP PNT 14A

Model

STEP BVM 12А

A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 2 plow bottoms for tractors with power output from 80-110 hp.

STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

2

Model

Country of origin

Mounted plow STEP BVM 12А

Italy

Plowing depth, cm

25-30

Required tractor power, hp

80-90

Distance between plow bottoms, cm

100-110

Frame clearance, cm

84

Furrow width

36/41/46/52

Frame section, mm

120х120х10

Weight, kg

800

STEP TRV 12A

A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 3 plow bottoms for tractors with power output from 100-140 hp.

STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

3

Model

Country of origin

Mounted plow STEP TRV 12A

Italy

Plowing depth, cm

25-33

Required tractor power, hp

130-150

Distance between plow bottoms, cm

100-130

Frame clearance, cm

84

Furrow width

36/41/46/52

Frame section, mm

120х120х10

Weight, kg

1150

STEP QRV 12A

A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 4 plow bottoms for tractors with power output from 125-165 hp.

MORO Aratri plows are equipped with a continuously operating protection system that prevents them from being damaged when hitting rocks and other obstacles. The system guarantees high-quality plowing on rocky soils. When hitting an obstacle, the plow bottom is smoothly lifted out of the soil. The higher the plow bottom is lifted, the lower its pressure is on the obstacle. The pressure force in the system can be adjusted, that is, the plow can be used for plowing both clean and rocky soils.

Parameters

Number of plow bottoms

4

Model

Country of origin

Mounted plow STEP QRV 12A

Italy

Plowing depth, cm

25-35

Required tractor power, hp

140-180

Distance between plow bottoms, cm

100-110

Frame clearance, cm

84

Furrow width

36/41/46/52

Frame section, mm

150х120х10

Weight, kg

1480

STEP PNT 14A

A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 5 plow bottoms for tractors with power output from 150 - 240 hp.

STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

5

Model

Country of origin

Mounted plow STEP PNT 14A

Italy

Plowing depth, cm

25-35

Required tractor power, hp

160-210

Distance between plow bottoms, cm

90-105

Frame clearance, cm

84

Furrow width

34/39/44/49

Frame section, mm

150х120х10

Weight

1830

STEP EXA 16A

A mounted plow for in-furrow operations with mechanical furrow width adjustment. The plow has 6 plow bottoms for tractors with power output from 200 - 270 hp.

STEP is a series of mounted plows of the latest design with a number of plow bottoms ranging from two to six. The STEP plow frame and all bearing parts are made from special Strenx® 700 steel that has a superior stress limit. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints; all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

6

Model

Country of origin

Mounted plow STEP EXA 16A

Italy

Plowing depth, cm

25-35

Required tractor power, hp

260-320

Distance between plow bottoms, cm

95-100

Frame clearance, cm

83

Furrow width

33/37/42/47

Frame section, mm

150х120х10

Weight, kg

2350

DRAGON 5+ AS

A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 5 plow bottoms for tractors with power output from 180−260 hp.

MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

5

Model

Country of origin

Semi-mounted plow Dragon 5+ AS

Italy

Plowing depth, cm

25-35

Required tractor power, hp

180-260

Distance between plow bottoms, cm

100

Frame clearance, cm

85

Furrow width

33/37/42/47

Frame section, mm

200х120x10

Weight, kg

3170

DRAGON 5+1 AS

A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 6 plow bottoms for tractors with power output from 200−280 hp.

MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

6

Model

Country of origin

Semi-mounted plow Dragon 5+1 AS

Italy

Plowing depth, cm

25-35

Required tractor power, hp

200-280

Distance between plow bottoms, cm

100

Frame clearance, cm

85

Furrow width

33/37/42/47

Frame section, mm

200х120х10

Weight, kg

3450

A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 7 plow bottoms for tractors with power output from 230−350 hp.

MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

DRAGON 6+1 AS

Parameters

Number of plow bottoms

7

Model

Country of origin

Semi-mounted plow Dragon 6+1 AS

Italy

Plowing depth, cm

25-35

Required tractor power, hp

230-350

Distance between plow bottoms, cm

100

Frame clearance, cm

85

Furrow width

33/37/42/47

Frame section, mm

200х120x10

Weight, kg

3740

DRAGON 7+1 AS

A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 8 plow bottoms for tractors with power output from 300−450 hp.

MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

8

Model

Country of origin

Semi-mounted plow Dragon 7+1 AS

Italy

Plowing depth, cm

25-35

Required tractor power, hp

300-450

Distance between plow bottoms, cm

100

Frame clearance, cm

85

Furrow width

33/37/42/47

Frame section, mm

200х120x10

Weight, kg

4100

DRAGON 8+1 AS

A semi-mounted plow for on-land and/or in-furrow operations with mechanical furrow width adjustment. The plow has 9 plow bottoms for tractors with power output from 320−500 hp.

MORO Aratri Dragon plows are a series of semi-mounted plows for on-land or in-furrow operations, versions that have from 5 to 9 plow bottoms are available. During the plow design development, modern computer systems for structural analysis and modeling of operational and fatigue characteristics were used. The Dragon plow frame and all load-bearing parts are made from special Strenx® 700 steel that has supreme performance characteristics. The entire structure is assembled using bolted joints, which made it possible to eliminate the defects that are inevitable for welded joints, all hinge joints have bushings and rods with wear-resistant coating, and the working bodies of the plow have special safety bolts to protect the plow frame in case of overload (large stones, tree roots, etc.)

Parameters

Number of plow bottoms

9

Model

Country of origin

Semi-mounted plow Dragon 8+1 AS

Italy

Plowing depth, cm

25-35

Required tractor power, hp

320-500

Distance between plow bottoms, cm

100

Frame clearance, cm

85

Furrow width

33/37/42/47

Frame section, mm

200х120x10

Weight, kg

4460

Subsoil cultivators

Weight, kg

1670

Number of stands

7

Country of origin

Spider 7М 300

Spider 7М 300

Model

Italy

Spider 9G 400

The G-series subsoil cultivators can work up to 65 centimeters deep, destroying the plough pan. The frame and all load-carrying elements are made of special Strenx® 700 steel, which enables the machine to withstand heavy loads and extend the service life of the subsoil cultivator. The entire structure is assembled exclusively using bolted joints, which is completely unusual for agricultural machines of this type. This increases the stability of the frame under dynamic loads, which provides flexibility during operation and makes the frame less susceptible to fatigue breakdown than a welded-structure frame. A rear double star-wheeled roller with a diameter of 220 mm is an integral part of a subsoil cultivator’s design. It destroys surface lumps, compacts the soil and controls the depth. Retrofitting the subsoil cultivator for mineral fertilizer application is available to order as an option.

Parameters

Number of stands

9

Model

Country of origin

Spider 9G 400

Italy

Operating width, m

4

Required tractor power, hp

250-400

Weight, kg

2900

Frame clearance, cm

92

Configuration

With rollers

Spider 9G 400 Fertibox

The G-series subsoil cultivators can work up to 65 centimeters deep, destroying the plough pan. The frame and all load-carrying elements are made of special Strenx® 700 steel, which enables the machine to withstand heavy loads and extend the service life of the subsoil cultivator. The entire structure is assembled exclusively using bolted joints, which is completely unusual for agricultural machines of this type. This increases the stability of the frame under dynamic loads, which provides flexibility during operation and makes the frame less susceptible to fatigue breakdown than a welded-structure frame. A rear double star-wheeled roller with a diameter of 220 mm is an integral part of a subsoil cultivator’s design. It destroys surface lumps, compacts the soil and controls the depth. Retrofitting the subsoil cultivator for mineral fertilizer application is available as an option. Model G subsoil cultivators that are equipped with 5, 7 or 9 stands can be retrofitted with a local dry fertilizer distribution system. In one pass, it is possible to both cultivate the soil and to accurately apply fertilizers on different depths, depending on the tool settings. This makes it possible to fertilize in such a way that during plant growth, the roots meet nutrients deep in soil, thus creating optimal conditions for better growth and increasing crop yields.

The kit consists of:

• fertilizer tank
• anchors for fertilization
• application rate regulator (electric motor)
• ladders and platforms for loading fertilizers

Parameters

Number of stands

9

Model

Country of origin

Spider 9G 400 Fertibox

Italy

Operating width, m

4

Required tractor power, hp

250-400

Weight, kg

3300

Frame clearance, cm

92

Configuration

With a packing wheel

Volume of the fertilizer tank, l

1250

Drive

Electric

Spider 7М 300

The M-series subsoil cultivators can work up to 55 centimeters deep, destroying the plough pan. The frame and all load-carrying elements are made of special Strenx® 700 steel, which enables the machine to withstand heavy loads and extend the service life of the subsoil cultivator. The entire structure is assembled exclusively using bolted joints, which is completely unusual for agricultural machines of this type. This increases the stability of the frame under dynamic loads, which provides flexibility during operation and makes the frame less susceptible to fatigue breakdown than a welded-structure frame. A rear double star-wheeled roller with a diameter of 220 mm is an integral part of a subsoil cultivator’s design. It destroys surface lumps, compacts the soil and controls the depth. Retrofitting the subsoil cultivator for mineral fertilizer application is available to order as an option.

Parameters

Number of stands

7

Model

Country of origin

Spider 7М 300

Italy

Operating width, m

3

Required tractor power, hp

130-220

Weight, kg

1670

Frame clearance, cm

78

Configuration

With rollers

Equipment

Brands

Dealers

Miscellaneous

© 2024, United Industrial LLC, INN 1650202670, OGRN 1101650000870

CHCNAV